PRODUCT DATA SHEET
Date:
05/15/2024
Doc ID:
504713
Spinnak
er
550 Summit Avenue
Troy, Oh 45373
800 543-9452
Request A Sample
Request Quotes
Product Search
Roll Products
Sheet Products
Print This Data Sheet
Click To Open PDF
SafeTE™ Silver Void Polyester ** SFA™ (2020) ** 50# liner
Item#:
0049184
------------ TRIMLESS PROGRAMS ------------
Recommended Print Type(s) to Test
Other
EFI™ Jetrion® (UV Inkjet)
Dist. Ctr
Troy, Ohio
Troy, Ohio
Ontario, CA
Ontario, CA
Length
2.5 K
5 K
2.5 K
5 K
Min. Width
3"
3"
3"
3"
Core
3"
3"
3"
3"
Facestock:
SafeTE™ Silver Void Polyester
A glossy Silver polyester film engineered to show tamper evidence, when paired with an apporpriate adhesive, by leaving the word "VOID" in a diagonal pattern on the substrate and label when removed. This facestock has excellent tear strength, chemical resistance, and heat resistance.
Typical Value
Basis Weight:
47.5
#/3300 ft
2
Caliper:
2.0
mils
Tensile MD/CD:
29900 / 32700
PSI
Elongation @ Break MD/TD:
165 / 135
%
Adhesive:
SFA™ (2020)
A clear, general purpose, emulsion acrylic permanent adhesive designed for applications with film facestocks. SFA exhibits excellent ultimate adhesion to polyethylene, polypropylene and glass. Well suited for small, cylindrical labeling. Limited testing shows this adhesive to be glove friendly, but application testing is recommended.
Coat Weight:
13
#/3300 ft
2
Coat Weight:
19.24
grams/m
2
Caliper:
.6
mils
Adhesion to Stainless Steel, oz. (90° Peel):
32
Loop Tack, oz.:
50
Service Temperature:
-40 to 240
°F
Minimum Application Temperature:
15
°F
Shear (1000g):
112
minutes
Release Liner:
50# liner
A bleached, calendered liner featuring higher tensile and tear properties than the 40# liner, making it an excellent liner for perforating, fan-folding, and edge-punching.
Typical Value
Basis Weight:
53
#/3000 ft
2
Caliper:
3.2
mils
Tensile MD/CD:
48 / 26
#/inch
Tear MD/CD:
45 / 51
grams
Opacity:
74
%
Total Product Caliper:
5.8
mils
Product Basis Weight Per MMSI:
250.11
#
Sh
elf Life:
12
month(s) when stored at 72° F, 50% RH
For application recommendations call 877-210-5104
For samples or other questions please call your Sales Representative.
Importa
nt Notice
These are typical values and should not be considered a specification.
Adhesive properties were tested with a film facestock unless denoted with an asterisk(*)
.
All
trademarks
are the property of their respective owners.
All information, recommendations for use, product designations, and descriptive materials about Spinnaker
Pressure Sensitive Products, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Pressure Sensitive Products, LLC. Because of the variety of possible applications for Spinnaker's products and the continuing development of new applications, all Spinnaker Pressure Sensitive Products, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Pressure Sensitive Products, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent informati
on
.
Last Revision:
08/31/2023