PRODUCT DATA SHEET
Date:
11/05/2024
Doc ID:
557A39
Spinnak
er
550 Summit Avenue
Troy, Oh 45373
800 543-9452
Request A Sample
Request Quotes
Product Search
Roll Products
Sheet Products
Print This Data Sheet
Click To Open PDF
Semi Gloss for EFI™ Jetrion® ** XYZ™ (2020) ** 40# liner
Item#:
0049223
------------ TRIMLESS PROGRAMS ------------
Recommended Print Type(s) to Test
Semi Gloss
EFI™ Jetrion® (UV Inkjet)
Dist. Ctr
Troy, Ohio
Troy, Ohio
Atlanta
Atlanta
Length
2.5 K
5 K
2.5 K
5 K
Min. Width
3"
3"
3"
3"
Core
3"
3"
3"
3"
Facestock:
Semi Gloss for EFI™ Jetrion®
This glossy, white top-coated 55# Semi Gloss is appropriate for EFI-Jetrion UV inkjet printing. This facestock is not recommended for wet applications.
Typical Value
Basis Weight:
55
#/3300 ft
2
Caliper:
3.1
mils
Tensile MD/CD:
25 / 17
#/inch
Gloss:
70
%
Tear MD/CD:
49 / 49
grams
Opacity:
87
%
Parker Print:
1.0
microns
Brightness:
87
%
Adhesive:
XYZ™ (2020)
A general purpose acrylic adhesive for paper facestocks, featuring excellent ultimate adhesion to polypropylene, polyethylene, and glass. Also appropriate for cylindrical labeling such as test tubes, vials, etc with the appropriate facestock. May allow for open time with some substrates.
Coat Weight:
13
#/3300 ft
2
Coat Weight:
19.24
grams/m
2
Caliper:
.6
mils
Adhesion to Stainless Steel, oz. (90° Peel):
31
Loop Tack, oz.:
51
Service Temperature:
-40 to 240
°F
Minimum Application Temperature:
15
°F
Shear (1000g):
112
minutes
Release Liner:
40# liner
A bleached, calendered liner featuring excellent die cutting and stripping characteristics. Recommended for use in roll-to-roll applications.
Typical Value
Basis Weight:
41
#/3000 ft
2
Caliper:
2.5
mils
Tensile MD/CD:
34 / 21
#/inch
Tear MD/CD:
34 / 36
grams
Opacity:
69 max
%
Total Product Caliper:
6.2
mils
Product Basis Weight Per MMSI:
238.11
#
Sh
elf Life:
12
month(s) when stored at 72° F, 50% RH
For application recommendations call 877-210-5104
For samples or other questions please call your Sales Representative.
Importa
nt Notice
These are typical values and should not be considered a specification.
Adhesive properties were tested with a film facestock unless denoted with an asterisk(*)
.
All
trademarks
are the property of their respective owners.
All information, recommendations for use, product designations, and descriptive materials about Spinnaker
Pressure Sensitive Products, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Pressure Sensitive Products, LLC. Because of the variety of possible applications for Spinnaker's products and the continuing development of new applications, all Spinnaker Pressure Sensitive Products, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Pressure Sensitive Products, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent informati
on
.
Last Revision:
05/23/2023